How to Adjust Acetate Frames and Fix Loose Temples or Nose Pads
Acetate frames are loved for their rich colours and comfortable feel, but daily wear can leave them slightly out of shape. The temples loosen, your glasses slide down your nose, or one side sits higher than the other. Many of these problems can be fixed at home. This guide explains how to adjust acetate frames and fix loose temples or nose pads safely, and when it is smarter to ask an optician for help.
Why Acetate Frames Need Adjustment

Acetate is a cellulose-based plastic that softens with gentle warmth, which is why opticians can shape it to fit your face. The same property means a frame can shift slowly through heat, sweat and daily handling. The tiny screws at the hinges can also work loose from repeated opening and closing.
What You Will Need
- A small eyeglass screwdriver
- A soft microfibre cloth
- A hair dryer on a low setting
- Optional: clear nail polish
How to Fix Loose Temples
A loose temple is usually caused by a loose hinge screw. Tighten it with an eyeglass screwdriver in small, gentle turns.
- Place the microfibre cloth on a flat table to protect the lenses and catch dropped screws.
- Open the temple fully and locate the small screw at the hinge.
- Turn the screw clockwise until it feels snug. Stop as soon as it is firm, because overtightening can strip the screw or damage the frame.
- If the screw keeps loosening, apply a tiny dab of clear nail polish to the thread and let it dry before wearing the glasses.
If the screw spins without tightening, is missing, or the hinge looks cracked, stop and don’t force it. Contact Eyemode support by email, phone or WhatsApp, as loose screws and misalignment are covered under Eyemode’s free repair service (not under warranty). If the problem can’t be fixed remotely, visit a local optician.
How to Adjust Acetate Frames Safely With Heat
Sometimes the hinge is tight, yet the glasses still feel loose against your head. The temple arms have probably opened outward. Because acetate becomes pliable when warm, gentle heat is the safe way to reshape it. Cold acetate can crack if bent with force.
- Hold the temple arm in the warm airflow of a hair dryer on a low setting. Keep the dryer moving and the lenses well away from the heat, because every Eyemode eyeglass lens has an anti-reflective coating and blue light filtering that excess heat can damage.
- The arm should feel warm, never hot.
- Make a small, gentle bend in the direction you need.
- Hold the shape for a few moments until the acetate cools and sets.
- Put the glasses on, check the fit, and repeat in small steps if needed.
Never use boiling water, an open flame, or a heat gun. Too much heat can warp or discolour the frame, and heat damage from home adjustment isn’t covered under Eyemode’s warranty. For a safer fix, reach out to Eyemode support for our free repair service.
Tip for glasses that slip forward: The tips of the temples rest behind your ears. If they are too straight, warm them and curve them slightly downward so they hug the back of the ear.
How to Fix Loose or Uncomfortable Nose Pads
Not every acetate frame has nose pads. Many have a moulded bridge that rests directly on your nose, while some have adjustable pads attached to small metal arms. Check which type you own before adjusting.
For frames with adjustable pads:
- If the glasses slide down, the pads may be too far apart. Gently squeeze the pad arms a little closer.
- If the pads pinch or leave marks, spread the arms slightly apart.
- Adjust both sides equally so the frame stays level.
- If a pad wobbles, check whether a small screw holds it and tighten it gently.
- Replace pads that look yellowed, cracked or hardened.
For frames without pads: Adjusting the temple fit with gentle heat often stops slipping. You can also stick adhesive silicone nose pads onto the bridge for extra grip.
When to See an Optician
Home adjustments suit minor fit problems. Visit an optician if you notice a cracked frame, a stripped or missing screw, a broken hinge, a loose lens, or a frame that stays uneven after careful adjustment.
How to Keep Your Frames Fitting Well

- Remove and put on your glasses with both hands.
- Store them in a case instead of leaving them in a hot car.
- Rinse with lukewarm water, wash gently with a drop of plain dish soap, rinse again, and pat dry with a clean microfibre cloth. For a quick clean on the go, use an alcohol-free lens spray.
If your frame can no longer be adjusted well, browse the acetate eyeglasses collection at Eyemode or explore the bestseller eyeglasses for popular styles. For more eyewear guides, visit the Eyemode blog.
Final Thoughts
Learning how to adjust acetate frames and fix loose temples or nose pads keeps your glasses comfortable all day. Small, regular checks, such as tightening a hinge screw or gently reshaping a temple with low heat, can stop minor problems from growing. Go slowly, make small changes, and never force the frame. When in doubt, a professional adjustment is the safer choice. For more eyewear tips and frame styles, stay connected with Eyemode.
Frequently Asked Questions
Can I adjust acetate frames at home?
Yes, minor adjustments are possible with gentle warmth and small bends. Go slowly and avoid force.
Why do my glasses keep getting loose?
Hinge screws loosen naturally through repeated opening and closing, so a periodic check helps.
Can I use a hair dryer to adjust acetate glasses?
Yes, on a low setting, keep moving it and keep it away from the lenses.
How often should I check my frames?
Checking the hinge screws every few weeks helps catch looseness early.
Do acetate frames have adjustable nose pads?
Some do. Many have a moulded bridge instead, which is adjusted through the temple fit.